Comm Server The comm server software on the system is the other half of the download software that is part of the HP Designjet 3D Software Solution. Parts to be built (.cmb files) are received by the comm server and saved on the data partition of the hard drive. Queue management of the parts to be built is also part of the comm server. Lastly the comm server provides HP Designjet 3D Software Solution the printer status information that is displayed on the workstation (PC). System Manager The system manager software provides the overall control and decision making functions that are used by the system during all operations.
User requests are received from the display driver (in response to button pushes). The requests are processed and commands sent to the controller board to activate the appropriate hardware. Move Compiler When “Start Part” is requested the system manager activates the move compiler. The move compiler retrieves the cmb file from the top of the queue. The CMB file defines the tool path for the part on a layer by layer basis. The move compiler calculates the proper extrusion rate for the road thus combining tool path and extrusion. The resulting motion control is saved in a PCB file.
Feeder This driver takes the output of the move compiler and feeds the motion control information to the controller board on demand. The feeder will typically start before the move compiler has finished the calculations for the part. This eliminates waiting for all calculation to be complete. As the controller board executes the motion control commands they are removed from dual port memory. The feeder adds new commands as space becomes available. Event/Command Monitor This software handles all non-motion control interactions between the single board computer and the controller board. Events are printer status information being sent to the single board computer.
Commands come from the single board computer telling the controller board to do something such as find home. -56