Tip shield replacement Tip shields can become worn or damaged over time. This can have a negative impact on the surface finish and detail of models. Replace the tip shields every 500 hours. Figure 40: Tip Shield damage New shield Worn shield 1. Enter Head Maintenance . A. From the display panel press Maintenance . B. Press Machine . C. Press Head. The head will come to rest in the center of the chamber and the Z platform will change position. GLOVES: The head area is hot, wear gloves when working in this area of the printer. 2. Remove the head cover by pressing the tabs in and pulling away from the head. See Figure 41. Figure 41:
Head cover tab locations Press tabs in to remove head cover Head cover -62