3. Position the blade of a small screwdriver between the tip shield and tip plate. Use the blade of the small screwdriver to separate the tip shield from the tip plate. See Figure 42. Figure 42: Tip Shield removal Insert small standard screwdriver to pry tip shields from tips. Tip shield Tip plate 4. Clean the tip using the wire brush supplied with the Startup Kit to remove any debris. See Figure 43. Figure 43: Clean tips with wire brush Clean the tips using a wire brush. 5. Install a new tip shield by pushing it, by hand, over the exposed tip, keeping the slotted end towards the back of the tip. See Figure 44. -63