omron — 8.6 Robot Mounting Frame

Chapter 8: Technical Specifications 8.6 Robot Mounting Frame The Hornet 565 is designed to be mounted above the work area, suspended from a user-sup- plied frame. The frame must be adequately stiff to hold the robot rigidly in place while the robot platform moves around the workspace. You can either use the design provided or design a custom support frame. See Mounting Frame on page 23. The drawings for a sample frame are provided here, starting with Mounting Frame, Orthogonal View on page 145. If you choose to design a custom frame, it must meet the following specifications: Frame natural frequencies for stable robot operations:

l Frequency > 25 Hz ( > 40 Hz for aggressive moves or heavy payloads) l Mounting surfaces for the robot flanges must be within 0.75 mm (0.029 in.) of a flat plane. If the flanges are not within this tolerance, they should be shimmed. CAUTION: Failure to mount the robot within 0.75 mm (0.029 in.) of a flat plane will result in inconsistent robot motions. The eAIB must be removable from the top of the frame, and the inner and outer arm travel envelopes must be considered. See Arm Travel Volume on page 133. The following are drawings of a frame suitable for supporting the Hornet 565. NOTES: (Unless otherwise specified) l Material: ASTM A500 Carbon Steel, Grade B or Grade C permissible.

l Remove all weld spatter and debris. l Continuously weld all seams and grind protruding welds to match adjacent surfaces. l Finish: Powder coat per RAL 9003 - Pure White. l Remove all burrs and sharp edges. l Dimensions apply after process. l Interpret drawings per ANSI Y14.5. l Dimensions are in mm, [in.] l Tolerances mm [in.]: o 1 place decimals: ±2.5 [0.090] o 2 place decimals: ±1.5 [0.060] o 3 place decimals: ±0.75 [0.030] l Angular dimensions: ±0 .5° Hornet 565 Robot User's Guide, 14608-000 Rev C Page 144 of 156