Chapter 5: System Operation 5.1 Robot Status Display Panel The robot Status Display panel is located on the side of the robot base. The combined status LED/high-power lamp and the brake-release button are on the underside of the robot base. The Status Display and LED blinking pattern indicate the status of the robot. Figure 5-1. Robot Status Display Panel Table 5-1.
Robot Status LED Definition Hornet 565 Robot User's Guide, 14608-000 Rev C Page 65 of 156 LED Status 2-Digit Status Panel Display Description Off No display 24 VDC not present Off OK High Power Disabled Amber, Solid ON High Power Enabled Amber, Solid Fault Code(s) Fault, see Status Display1 Amber, Slow Blink OK Selected Configuration Node Amber, Fast Blink Fault Code(s) Fault, see Status Display1 1See Status Panel Fault Codes on page 66.