Contents CONTENTS If the Plotter Produces a Black and White Plot When You Expected a Color Plot (DesignJet 750C Plus) 9-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Plotter Has Printed a Different Plot Than the One You Were Expecting 9-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Quality Of a Color Plot Is Not as Good as You Were Expecting (DesignJet 750C Plus) 9-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solving Print Quality Problems 9-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Color Is Not as Expected 9-16 .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If there are White Streaks in Solid Fill Areas 9-16 . . . . . . . . . . . . . . . . . . . . . . . . If there are Other Gaps in Solid Areas or in Lines (DesignJet 750C Plus) 9-17 . If there are Jagged Vertical or Horizontal Lines 9-18 . . . . . . . . . . . . . . . . . . . . . . If there are Slightly Warped Lines 9-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If there are Color “Shadows” (DesignJet 750C Plus) 9-18 . . . . . . . . . . . . . . . . . . If One or More Cartridges are not Printing at All 9-18 . . . . . . . . . . . . . . . . . . . . If there are Blurred Lines (Ink “Bleeds” from Lines) 9-19 . . .
. . . . . . . . . . . . . . . If there are Blotchy Areas (Uneven Fill Density) 9-19 . . . . . . . . . . . . . . . . . . . . . If the Plot Is Too Dark or the Color Too Saturated 9-19 . . . . . . . . . . . . . . . . . . . . If there Is Pronounced Banding In Area Fills 9-20 . . . . . . . . . . . . . . . . . . . . . . . . If Ink Smears After You Remove a Plot 9-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solving Front Panel Problems 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Access Cartridges Key Does Not Work 9-21 . . . . . . . . . . . . . . . . . . . . . . . If None of the Front Panel Keys Work 9-21 . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . If Page Format/Rotate Does Not Work 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If A Display Message Will Not Clear 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If A “System Error” Message Is Displayed 9-22 . . . . . . . . . . . . . . . . . . . . . . . . . If An “Out Of Memory/Data Was Lost” Message Is Displayed 9-22 . . . . . . . . . . Solving Miscellaneous Problems 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Plotter Does Not Plot 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the Plotter Seems Too Slow 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . If the Plotter Waits Too Long to Plot a Nest 9-24 . . . . . . . . . . . . . . . . . . . . . . . . . If the Plotter Performs the Cartridge Alignment Routine Unexpectedly 9-24 . . . If the Bail (Black Metal Bar) Does Not Lower All the Way 9-24 . . . . . . . . . . . . Getting Help 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What to Do Before You Call 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If a Repair Is Needed 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi