HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Reconfiguring Your Plotter RECONFIG. 7 To See the Current Configuration of the Front-Panel Settings To See the Current Configuration of the Front-Panel Settings 1 Make sure either a roll or a sheet of media is loaded. 2 Print the Current Configuration Plot , by pressing the up-arrow and down-arrow keys simultaneously. STATUS ↑ Press these two Ready ↓ simultaneously 0014 The Current Configuration Plot lists, in an easy-to-read format, all the items available in the front-panel menus, together with their current settings (in red italics, for the HP DesignJet 750C Plus).

Note that some of the items do not appear in the front-panel display unless you have set Utilities / Menu mode to Full (the default is Short , so that they do not appear). See the legend at the bottom of the plot for details. NOTE. Do not confuse the Current Configuration Plot with the Service Configuration Plot, which you can print by selecting Utilities / Service config . Apart from its use in calibrating the plotter, as explained on page 7-5, the Service Configuration Plot is likely to be needed only by a service engineer. 7-3