Setting Up the Plotter Task 2: (Optional) Install Memory Expansion Modules Task 2: Install Memory Expansion Modules (Optional) 700 Your plotter comes with 5.5 MB of standard memory. 750C Plus Your plotter comes with 11 MB of standard memory. You can expand this by adding one or two memory expansion modules, in any combination. Supported sizes are 4 MB, 8 MB, 16 MB and 32 MB. So the maximum standard memory for your plotter is: 700 5.5 + 32 + 32 = 69.5 MB 750C Plus 11 + 32 + 32 = 75 MB For HP part numbers, see page 11-14. 1 Make sure that the plotter is switched OFF and that neither the power cord nor an interface cable is connected. X X 1847 1-6