HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Setting Up the Plotter Task 3: Switch On and (Optional) Change the Language From English Task 3: Switch On and Change the Language From English (Optional) The plotter’s front-panel menus and all the plotter’s sample plots are available in the following languages 1 : English, French, German, Italian, Japanese, Portuguese, and Spanish. By default, the language is English. W A R N I N G Be sure that the power cord supplied with your plotter matches your ac power connection requirements. Use only three-wire (earth-grounded) power cords with this plotter. SETUP 1 1 Make sure that the power switch on the front of the plotter is OFF.

2 Plug the power cord into the socket at the back of the plotter, and then into your power outlet. 1848 If English OK or if you have already changed the language 3 Switch on the plotter by pushing the power switch. Then go to Step 4. on If there is no sound, nor any light on the front panel, you have a power problem. 1843 1 The physical front-panel overlay is also available in Chinese, Korean and Taiwanese. 1-9