Setting Up the Plotter Setup Task 3: Switch On and (Optional) Change the language From English If English not OK or if you want to change the language 4 Hold down the Enter key on the front panel and then switch on the plotter by pushing the power switch. Enter 1 Press and hold 2 Switch on Release the Enter key when “ STATUS / Initializing ” appears on the front-panel screen. If there is no sound, nor any light on the front panel, you have a power problem. 1843a 5 When the word “ English ” appears on the front-panel screen, press the ↑ or ↓ key until your language appears. Then press Enter . LANGUAGE ↑ English Enter ↓ 0014 1-10