4.3. Operating lights and wipers Headlamp switch When the headlamp (dipped beam) is turned on, push the lamp control handle forward to turn on the high beam; Pull the handle back to its original position to turn off the high beam. Pull backward the lamp control handle to turn on the high beam; releasing the lamp control handle to turn off the high beam. ■ Daytime running lamp system During daytime driving, to make it easier for other drivers to see your car, as long as the engine switch is placed in "IG-ON" mode and the position lights is turned off, the daytime driving light will be automatically turned on.
It can be set to turn on and off the daytime running lamp in the vehicle setting of the audio system. (See P.223) 136 Front position lamp, rear position lamp, license plate lamp and instrument panel backlights illuminate. Headlamps (dipped beam) and all the above lamps illuminate. Headlights (low beam), position lights, license plate lights turn on and off automatically Off. Note: When the switch is in the AUTO position, if the headlamps, position lights and license plate lights are off, the daytime running lights will be on. Turning on the high beam