Hongqi — 空白页面

4.3. Operating lights and wipers ■ Rain & lamp sensor The sensor may not function properly if an object blocks the sensor, or anything affixed to the windshield blocks the sensor. Doing so interferes with the sensor detecting the ambient lamp intensity and may cause the automatic headlamp system and automatic wiper malfunctions.  Automatic headlamp beam height adjusting system The automatic headlamp beam height adjusting system can automatically adjust the headlamp beam height according to the number of passengers, the load condition of the vehicle and the road environment to ensure that the headlamps will not interfere with other road users.

With the engine switch in IG - ON and lamp light switch in AUTO position, if the low beam lamp, position lamp and license plate lamp are on, the door will be locked when the engine switch is turned to IG - OFF. When the door is unlocked again, the above lamps will be on for a while and then automatically extinguish. The on/off of lighting upon boarding and lighting time can be set in the vehicle setting of audio system. (See P.223) 4 Driving When the engine switch is in the "IG-ON" mode and the light switch is in the auto position, if the low beam, position lights and license plate lights are on, then switch the engine switch to the "IG-OFF" mode and lock the doors.

When the door is unlocked again, the light will be on for a period of time, then it will turn off automatically. The on/off of lighting upon boarding and lighting time can be set in the vehicle setting of audio system. (See P.223) 137 Off-vehicle lighting system * Boarding lighting system *