4-5. Use other driving system Cancel Depress the brake pedal or push the cruise control handle forward to the "CANCEL" position and then release to cancel the cruise control. SACC and ACC switch setting • When the ACC is working and the SACC setting conditions are met, pull the cruise control handle back to the “ON / OFF” position twice consecutively to switch to the SACC mode. 4 • When SACC is operating, the driver operates the steering wheel or turn signal switch to automatically switch to ACC mode. • When SACC is working, the camera cannot recognize the lane in front and automatically switches to ACC mode.
Driving When SACC is working, and there is a sudden sharp curve, it will automatically switch to ACC mode • When SACC is working, when the camera detects that the lane line is too wide or too narrow, it will automatically switch to ACC mode. Noise of SACC automatic deceleration It is normal that noise will be generated when the SACC is applying automatic deceleration. Headway By default, the follow-up distance is ''Spacing 4''. Advanced cruise control can be set when ● In the audio system, set the cruise mode to SACC. ● Close all the doors and the engine compartment cover. ● Driver wears the belt. ● The shift lever is in D. ● The brake pedal is not depressed by the driver.
● The camera of the advanced driver assistance system is not blocked and has no fault. ● The lane line is clear and meets national standards. ● SACC/ESC/AEB/TCS/ABS/EPS/EMS functions are normal. ● HDC/APA is not activated. ● The driving mode is not in snow mode or off-road mode. SACC conditions paused ● When the vehicle needs to overtake, depress the accelerator pedal deeply for less than 1min (minutes), and the advanced cruise control is resumed after releasing the accelerator pedal. 159 Canceling the super cruise control