Hongqi — 空白页面

4-5. Use other driving system  Conditions for canceling the super adaptive cruise control ● The driver operates the cruise control handle to the "CANCEL" position. ● The driver depress down the pedal or press and hold the EPB button. ● Any door or engine compartment cover is opened. ● The driver unfastens the seat belt. ● The system determines the hands leave the steering wheel for a while. ● The driver depresses the accelerator pedal for more than 1 min (minutes). ● The shift lever is switched to the position except D. ● ABS/TCS/ESC is activated. ● AEB.HDC.APA function is activated. ● When the driving mode is switched among snow mode, off-road mode, and sand mode.

● System related function fault.  SACC system fault Have the FAW authorized Hongqi dealer check the vehicle if a fault has occurred.  After turning off the IGNITION switch When turning off the IGNITION switch, the set cruise speed or headway will be deleted.  Adjusting or calibrating SACC system Please adjust or calibrate SACC under the following circumstances, otherwise SACC may not work properly: • Front windshield is damaged or replaced. • Remove and install the camera unit of the advanced driver assistance system. • After adjusting wheel alignment. Please contact with China FAW authorized Hongqi distributors. 160