Hongqi — 空白页面

4-5. Use other driving system Blind Spot Detection (BSD) * The system contains a blind spot detection, side warning assist (SWA) and a cross traffic alert (CTA) to provide driving assistance. When the gear lever is in D position and the vehicle speed is greater than 30km/h, if the rear-side vehicle in the 7m (m) blind area or the 7 - 70m (m) interval behind the vehicle, the corresponding rear-view mirror warning indicator turns on. If the switch of the turn signal on the corresponding side is turned on at this time, the warning indicator will flash and a warning sound will be sent out at the corresponding side to remind the driver that it is dangerous to change lanes at this time.

When the gear position is in R gear and the vehicle speed is 0~10km/h, if there is a crosswalk vehicle behind the vehicle, the indicator light in the corresponding side rearview mirror will be lit, the instrument cluster will display the warning icon, and the corresponding side speaker will give out a warning sound to remind the driver to pay attention to the crosswalk vehicle. When BSD off key is pressed, the cluster gauge will display the system off indicator lamp and BSD system is turned off. Press the blind area detection button again, the indicator turns off, and the blind area detection system turns on.

If the system is faulty, the blind spot detection system will be in OFF status and cannot be turned on with the switch. 190 Blind spot detection and side warning assist Cross Traffic Alert (CTA) Blind Spot Detection (BSD) ON/OFF