4-5. Use other driving system Blind area detection and lane change assist functions may not be activated or may be delayed in the following situations: ● When the vehicle is driven on a steep slope. ● When the vehicle is driven through the mountain top or the mountain road. ● When there is a difference in height between the driving lane and the adjacent lane. ● When there is a small turning radius. ● When the vehicle is driven on roads covered with snow. ● When A lot of snow or ice is gathered near the radar sensor. In the following conditions, BSD and lane change assistance warning may be advanced or expanded: ● When the two lanes are too narrow and an alarm will occur in the bay.
● When the vehicle is driven on the road with fixed obstacles (such as tunnel walls, viaduct cement barriers, metal billboards, etc.) at side of the vehicle. 4 In the following conditions, the reverse lateral warning function may be unable to warn or expand the warning range: Driving ● When the vehicle is parked obliquely. ● The reversing speed exceeds 10 km/h. ● When a large amount of snow or ice is gathered near the radar sensor on the rear bumper. ● The vehicle speed and yaw angle of target vehicle keep changing in the detection zone. ● When there is a coming vehicle in direct rear of the vehicle. 191