Hongqi — 空白页面

4-5. Use other driving system Driver assistance system Functions integrated by ESC (Electronic Stability Program), which may be different according to different vehicle models. To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. However, bear in mind that these functions are only for assistance and should not be excessively relied upon when driving the vehicle.  Anti-lock braking system (ABS) Help to prevent skidding or deviation due to wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slippery road surface.

 Electronic brake force distribution (EBD) Distribute dynamic breakeforce of front and rear wheels in proportion according to vehicle load, road conditions and brakeforce changes to improve the vehicle braking stability and handling.  Traction control system (TCS) Maintains drive power and help prevent any of the drive wheels from spinning when the vehicle is started or accelerated on a slippery road surface.  Hydraulic braking assist (HBA) Fast depress the brake pedal to compensate the brakeforce. The brakeforce may increase effectively.

 Hydraulic brake booster (HBB) When the vacuum degree of the braking system is insufficient, braking force compensation can effectively increase the braking force.  Hill descent control (HDC) When the vehicle is going downhill and the speed is 3 - 35km/h, apply corresponding braking force to the wheels to keep the downhill running at a stable speed. The steep descent button can be set to turn on and off the steep descent function.

 Hill start assist (HHC) When the driver moves the foot from the brake pedal to the accelerator pedal during the process from the parking to start on a downhill, the function is used properly to maintain the brake pressure applied by the driver to prevent the vehicle from backward movement.  Electronic stability control (ESC) When turning suddenly or turning on slippery roads, it helps the driver to control the sideslip to ensure the vehicle's correct driving trajectory.  Active cruise control deceleration control (CDD-S)* The auxiliary ACC adaptive cruise control system is used to carry out the adaptive cruise deceleration control.

 Parking brake deceleration (CDP) Long pull EPB button to enter the deceleration state adaptively.  Auto hold When the vehicle is still, the parking brake is applied by the hydraulic system and the parking is briefly maintained. After that, a function of parking is performed by the electronic parking system, which can be turned off/on by the button. 206