Steam en 4. Press "Added steam". 5. Use the control ring to set the steam setting. ▶ Remove the water tank from the tank recess. ATTENTION! Drying the water tank in the hot cooking compartment leads to damage to the water tank. ▶ Do not dry the water tank in the hot cooking com- partment. Cleaning the water tank in the dishwasher will damage it. ▶ Do not clean the water tank in the dishwasher. ▶ Clean the water tank with a soft cloth and standard washing-up liquid. Steam setting Added steam 0 None 01 Low 02 Medium 03 High Note: If the water tank runs dry during operation, a notification appears in the display. The appliance continues to operate without added steam.
→ "Filling the water tank", Page 15 a The appliance begins to heat up. a The time, how long the appliance has already been 6. Press to start. 1. Use to open the control panel. 2. Remove the water tank. 3. Carefully remove the lid of the water tank. 4. Empty the water tank, clean it with detergent and then rinse it thoroughly with clean water. 5. Dry all parts with a soft cloth. 6. Rub the seal on the lid until dry. 7. Leave the water tank to dry with the lid open. 8. Place the lid on the water tank and push down on it. 9. Insert the water tank and close the control panel. in operation, and the settings are shown in the dis- play. 7.
When the food is ready, press to switch the appli- ance off. 8. Empty the water tank and dry the cooking compart- ment. → "After every steam operation", Page 17 Drying the drip trough Changing the steam setting You can change the steam setting at any time. 1. Press "Added steam". 2. Use the control ring to change the steam setting. a The change is applied immediately. WARNING ‒ Risk of burns! The appliance becomes hot during operation. ▶ Allow the appliance to cool down before cleaning. Requirement: The cooking compartment has cooled down. 1. Open the appliance door. 2. Note: Changing the temperature Once operation has started, you can change the tem- perature directly.
▶ Use the control ring to change the temperature. a The temperature is applied immediately. The drip trough is underneath the cooking com- Changing the type of heating When you change the type of heating, the other set- tings will also be reset. 1. Press to pause operation. 2. Press "Types of heating". 3. Press the type of heating that you want to use. a The corresponding default temperature appears in the display. 11.4 After every steam operation The remaining water is pumped back into the water tank after every operation with steam. Then empty and dry the water tank and the cooking compartment. sponge cloth and wipe it carefully.
Emptying the water tank Drying the cooking compartment Dry the cooking compartment after each steam opera- tion. ▶ Dry the cooking compartment by hand or use the "Drying" function. → "Drying", Page 24 WARNING ‒ Risk of burns! The water tank may heat up while the appliance is in operation. ▶ Wait until the water tank has cooled down from the previous operation. 17 Soak up the water in the drip trough wit