HP — Left plate assembly

9 Unthread the connector wires and ribbon cable from the top of the printer frame (callout 1). 10 Disconnect the connector (callout 2) from the optional tray connector block at the bottom of the printer, and slide the connector block forward and then straight out. Unthread the connector wires from the stay. 11 Remove eight screws (callout 3). If you have not already removed the fuser, remove the fuser screw (callout 4). 12 Lift the left plate assembly off of the printer. 1 3 4 2 Figure 67. Removing the left plate assembly 126 Chapter 5 - Removal and replacement ENWW