HP — ECU

Bottom assemblies ECU 1 Remove the left side cover (see “Left side cover” on page 81). 2 Remove the back cover (see “Back cover” on page 82). 3 Remove the right side cover (see “Right side cover” on page 84). 4 Remove the formatter. [See “Formatter (hp LaserJet 1300 series)” on page 97, or see “Formatter (hp LaserJet 1150 printer)” on page 99.] 5 Unplug the three spade connectors (callout 1). 6 Disconnect the motor cable connector (callout 2) on the side of the motor. 7 Unplug the fuser cable connector (callout 3) by pressing and releasing the tab on the back of the connector. 8 Unplug all other cable connectors (callout 4) from the ECU. 1 2 4 3 Figure 68.

Removing the ECU (1 of 5) ENWW Bottom assemblies 127