Table 13. Basic troubleshooting (continued) # Verification steps Possible problems Solutions 4 Is the software installed correctly? Uninstall and then reload the product software. Make sure you use the correct installation procedure and the correct port setting. 5 Does the product print from the computer? Connect the parallel cable or USB cable to the product and the computer. Use a word- processing application to send a print job to the printer. Software is not installed, or an error occurred during software installation. The cable is not connected correctly. Reconnect the cable. An incorrect printer driver is selected. Select the correct printer driver.
Other devices are connected to the parallel or USB port. Disconnect the other devices and try again to print. There is an LPT port driver problem. Reset the computer port settings. See your computer user guide for instructions. The formatter has failed. Replace the formatter ENWW Basic troubleshooting 141