HP — Checking the print cartridge

Checking the print cartridge Image formation defects are many times the result of problems in the print cartridge. If there is any doubt, always replace the print cartridge before troubleshooting image defects. Use the following checklist to make sure that the print cartridge is still operable. † Make sure that the print cartridge is seated properly. † Inspect the print cartridge for toner level. † Check the print cartridge to see if it has been disassembled or refilled. † Inspect the print cartridge to see if toner is leaking through worn seals. † Check the surface of the photosensitive drum in the cartridge to see if it has been damaged or scratched.

Touching the drum contaminates the photosensitive surface and can cause spotting and image defects. † Blurred areas on printed pages indicate that the photosensitive drum in the cartridge has been overexposed to light. Because overexposure to light causes permanent damage to the photosensitive drum, the cartridge should be replaced. To redistribute toner in the cartridge Before installing a new cartridge or when toner begins to run low, redistribute the toner by rotating the cartridge back and forth five or six times. 148 Chapter 6 - Troubleshooting ENWW