HP — Solving image-quality problems

Solving image-quality problems Use the following tables to help solve problems with printed pages. If the problem occurs when printing, see table 18, “Solving print image-quality problems,” on page 149. Also, see table 19, “Solving paper-feed problems,” on page 154. Solving print image-quality problems Table 18. Solving print image-quality problems Pages do not print. Problem Cause Solution The printer is not plugged in. Make sure that the printer is plugged into a live wall outlet or power strip. The computer cable is loose. Check that the parallel cable between the printer and the computer is securely connected. The tape was not removed from the print cartridge.

Remove the print cartridge, remove the tape, and return the print cartridge. (See “Print cartridge” on page 76.) The print cartridge is out of toner. Replace the print cartridge. (See “Print cartridge” on page 76.) The media you are using does not meet HP’s specifications (for example, it is too moist or too rough). Make sure that the media meets specifications detailed in the Print Media Guide for the HP LaserJet printer family. Parts of the page around the edges are not printing. The printer cannot print to the edge of the paper. The printer has minimum margins on each edge of 4.23 mm (0.167 inches. To get the image to fit into this printable area, slightly reduce the size of the image.

The reduction setting is set incorrectly. Check the reduction setting in the “Print” or “Setup” window from within the program you are using. ENWW Errors 149