Data Logging and Display Event Settings This section describes IWS's logging and event-retrieval features. An event can be any tag change, generating reports or recipes, opening and closing screens, logging onto and logging off the security system, and so forth. IWS saves all of these events in a log file, which can be retrieved by the Alarm/Event Control object. Event log files are stored in the project's \Alarm folder (the same folder where the project saves alarm history files). The event log file names must conform to the evYYMMDD.evt format, where:
• YY represents the last two digits of the year in which the event log file was generated • MM represents the month in which the event log file was generated • DD represents the day on which the event log file was generated For example, a log file for May 7, 2003 would be ev030507.evt . The event files ( *.evt ) are ASCII text files created according to the following format: P1|P2|P3|P4|P5|P6|P7|P8|P9|P10 P1|P2|P3|P4|P5|P6|P7|P8|P9|P10 . . . P1|P2|P3|P4|P5|P6|P7|P8|P9|P10 where: • P1 = File version (Current 1 ) • P2 = Event Type 1. SECURITY SYSTEM 2. DISPLAY 3. RECIPE 4. REPORT 5. CUSTOM MESSAGES 6. SYSTEM WARNING 7.
LOG TAGS • P3 = Event Time ( DD/MM/YYYY HH:MM:SS.SSS ) • P4 = Tag Name • P5 = Tag Value • P6 = Source (Not used) • P7 = User Name • P8 = User Full Name • P9 = Event Message • P10 = Station Configuring the Events Settings Use the steps to configure the event-retrieval feature: 1. Select the Global tab. Page 226 InduSoft Web Studio