omron — Events

Data Logging and Display 2. Double-click the Event Logger icon to open the Event Settings dialog: Event Settings dialog 3. Configure the parameters on the Event Settings dialog as follows: • Enable event logger checkbox: Click (check) this box to enable event-logging. • Disable text box: Type a tag into this field. If the tag value is other than 0 ( false ), then the project automatically disables the Event Logger during runtime. • Event Database button: Click to open the Database Configuration dialog , in which you can enter settings that will enable the project to save event history data to a database. • Settings : • Security System checkbox:

Click (check) this box to include security system events in the historic event file. The project logs the following security system events: • Log On / Log Off users • User created/removed using the CreateUser() or RemoveUser() functions • User blocked/unblocked using the BlockUser() or UnblockUser() functions • User blocked by the security system after several attempts to enter an invalid password • Password expired • Password modified • Invalid Log On attempt • Display checkbox: Click (check) this box to include screen Open and Close events in the historical event file. • Recipe checkbox:

Click (check) this box to include recipe load, save, init, and delete events in the historical event file. • Report checkbox: Click (check) this box to include reports saved to disk or send to printer events in the historical event file. • Custom Messages checkbox: Click (check) this box to include events generated by the SendEvent(strEvent) function in the historical event file. • System Warning checkbox: Click (check) this box to include general system warnings (such as Division by zero , Attempted to access invalid array index , and so forth) in the historical event file. The project logs the following system warning events:

• Errors that occur when sending alarms by email • Tag was blocked/unblocked • Division by zero • Connection/Disconnection of the remote security system • Tags checkbox: Click (check) this box to enable and log tag changes in the historical event file. Configure the tags you want to log in the Tags table as follows: • Tag Name column: Type the name of the tag you want to log in the event file. • Dead Band column: Type a value to filter acceptable changes against. InduSoft Web Studio Page 227