omron — Drivers

Communication with Other Devices 2. In the Serial Encapsulation field, select TCP/IP or UDP/IP : The following fields are available: • IP Address field: Specify the IP Address for the Terminal Server. This field accepts tags in curly brackets. • Port Number field: Enter the TCP/IP or UDP/IP port number. • Status Tag field: This field is available only when using TCP/IP. The tag on this field receives the value 1 when the TCP/IP connection is established; otherwise, it receives 0. • Server Mode field: The TCP/IP encapsulation allows the Server Mode, making the remote client responsible for establishing the connection to enable the communication.

Using Modem Connections Most of the serial drivers allow the use of modem connections. The modem connection has been designed to enable communications with remote serial devices connected through a phone line. The following diagram provides one example of applying this solution: Modem Connection You can enable the modem connection by following the steps below: 1. Right-click on the driver's folder, and then choose Settings from the shortcut menu. This will give you access to the communication parameters. 2. In the Serial Encapsulation menu, select Modem : Caution: The Modem option is not supported for Pocket PC v3.00 or older. The following fields are available: • Name drop-down list:

Select the modem that the driver will use to establish the connection. If you do not know the modem name, use the Auto Detect option. The Auto Detect 1 will use the first modem Page 294 InduSoft Web Studio