Project Security Server Address Manual Configuration If for some reason the LDAP server cannot be accessed using its domain name, then you can manually configure the server's IP address: select Enable , and then type the IP address and port number of the LDAP server. Note: The default port for LDAP is 389. However, please verify the port number with the server administrator. Save Rights to Server By default, IWS security rights are saved entirely within your project. However, you can save those rights back to the LDAP server, either to make them available to other projects that use the same LDAP server or for simple redundancy.
To make this option work, you must first extend the server's LDAP schema to contain additional information about the project security system. See Extending the LDAP schema to allow saving of security rights . Once that is done, click Modify to provide your LDAP server credentials and then select Enable . LDAP Query Customization By default, the LDAP server provides a list of all registered users and groups, so in a large or complex network environment, that can result in an impractically long list to manage when you're configuring your project security system.
To restrict the list of users and groups, you may customize the LDAP query to eliminate anyone who should never have access to your project: click Modify to provide your LDAP server credentials, select Enable , and then configure the Search Base and Filter Query settings. For the proper syntax, consult the LDAP server documentation. Extending the LDAP schema to allow saving of security rights In order to save IWS project security rights back to a Domain (LDAP) server, the server's LDAP schema must be extended to contain the additional information.
The server must already be configured and running on your network, and you must have sufficient privileges to make changes to the server configuration. In this procedure, you will create a new attribute called "proprietarySCADAInfo" to contain the IWS project security rights, and then you will add the attribute to the "person" and "group" classes in the server configuration. These classes correspond to users and groups in the project security system. Please note this procedure only shows how to extend the schema in Microsoft Active Directory running on Windows Server 2003.
The exact procedure is different for other LDAP servers and operating systems, but the basic steps should be essentially the same. Please consult your LDAP server documentation. Caution: Extending a server's LDAP schema cannot be undone. 1. Register the schema management DLL. a) Click Start > All Programs > Accessories > Command Prompt . A Command Prompt window is displayed. b) At the prompt, type cd %SystemRoot%\System32 and then press Return. The working directory is changed. c) Type regsvr32 schmmgmt.dll and then press Return. If the DLL is successfully registered, then a confirmation message is displayed. d) Click OK to dismiss the message. e) Close the Command Prompt window.
Page 326 InduSoft Web Studio