Project Security Configuring server settings for Domain (LDAP) To configure the server settings: Server Settings dialog for Domain (LDAP) 1. In the Domain box, type the domain name of the LDAP server. 2. In the User and Password boxes, type your logon credentials for the LDAP server. Note: You must have sufficient privileges to get lists of groups and users. Please consult your LDAP administrator. 3. In the Connection timeout box, type the timeout (in seconds) after which the client will attempt to reconnect to the LDAP server. (A typical connection timeout is 4–5 seconds.) 4.
In the Retry interval box, type the frequency (in seconds) at which the client will try to connect to the LDAP server if the connection could not be established. 5. Click Check Connection to confirm that the project can connect to the specified domain. If it cannot, review and correct your settings. 6. Click OK . Note: The project security system will cache the most recent users in case the project loses its connection to the LDAP server. These users will still be able to log onto the project. You can make the cache size unlimited by setting Cache size to 0 , and you can make the cache never expire by setting Cache expiration to 0 .
In the LDAP Advanced Settings tab of the dialog, there are additional settings that should be configured only by experienced LDAP administrators: LDAP Advanced Settings InduSoft Web Studio Page 325