omron — Building a Simple Application

Deploying as a Web Application Building a Simple Thin client program As we will see shortly, there is no one way to build a Thin client program. The following procedures allow you to develop a simple, unsecured Thin client program. Procedure A: Thin Client using NTWebServer, Local Loopback An easy way to initially develop and test a Thin client program is to use the light-weight Web server NTWebServer on your development PC, initiate the runtime project and use Microsoft Internet Explorer on the same PC to display the Web pages. Step 1: Configure IWS Settings 1. On the Project tab of the ribbon, in the Web group, click Thin Client .

• In the Data Server IP Address field, enter 127.0.0.1 • Check the Auto Screen Scaling , Enable File Compression , and Enable Tooltips checkboxes are checked • Click on the IP Security Button . Be sure then Enable checkbox is unchecked. Click OK . • Click on the Advanced Button . Be sure the Web Tunneling Gateway Enabled checkbox is unchecked. Click OK. 2. Open the Execution Tasks dialog ( Tasks on the Home tab of the ribbon) and be sure the TCP/IP Server task is set to Automatic. Step 2: Configure Database 1. In the Development Environment, select the Global tab of the Project Explorer. Open the Project Tags folder. Page 362 InduSoft Web Studio