Deploying as a Web Application 3. Run the Verify Project tool ( Verify on the Home tab of the ribbon). This will set change the Data Server IP address in the web pages, so that the Thin Client will automatically exchange data with the correct Data Server. Step 2: Start the runtime project 1. On the Home tab of the ribbon, click Run . 2. Be sure NTWebServer is still running. Step 3: Launch Microsoft Internet Explorer and connect to the Web Server 1. Click on the Start button (or Alt Tab) to access the Microsoft Internet Explorer program. 2. Start Internet Explorer, and type the address of the starting (home webpage). E.g. http://192.168.1.100/startup.html 3.
Sign on as Guest with no password, assuming no security has been enabled. Procedure C: Thin Client using IIS, Network IP Once Procedure B has been completed, the next step is to enable IIS to become the Web Server for your Thin Clients instead of NTWebServer. The following are the basic steps to configuring IIS, although depending on your network and Operating System environment, additional settings may need to be configured such as user security. Step 1: Configure IWS Settings 1. Be sure NTWebServer is terminated. 2. Click the Start button, then Control Panel > Administrative Tools . 3. Select (click on) Internet Information Services . 4.
Expand the Web Sites tree structure to see the Default Web Site . Page 364 InduSoft Web Studio