omron — Examples of Client/Server Architecture

Deploying as a Web Application • When the Thin Clients can connect to the Server through the Intranet (LAN – Local Area Network) or through the Internet (WAN – Wide Area Network). In this case, the Primary addresses should be configured based on the network used more often by the Thin Clients. In the following examples, the LAN addresses are used as Primary and the WAN addresses are used as Secondary. The following table describes the meaning from some terms used in the next examples: Example 1: Web Server and Thin Client in the same Intranet (LAN) This is the very common architecture, as well as the simplest to configure.

In this architecture, both the Web Server (e.g., Microsoft IIS) and the Data Server (i.e., the IWS TCP/IP Server module) are running on the same PC. The Thin Client connects to the Web Server to download the HTML screen file(s). Then it connects to the Data Server to exchange data with the IWS runtime project. Since both the Thin Client and the Server station are connected to the same network, the Thin Client can access the Server station directly through its IP address (or host name). Configuration : Note: • URL From Thin Client LAN: http://IP_SERVER_LAN/ScreenName.html • Home directory of the web server (HTTP server) on the server station:

Web sub-folder of the project Page 374 InduSoft Web Studio Term Description LAN Local Area Network (for example, Intranet) WAN Wide Area Network (for example, Internet) Server Station where the following components are running: • IWS (TCP/IP Server task) • Web Server (for example, Internet Information Services from Microsoft – IIS) • Web Tunneling Gateway for IIS (if enabled) Although IWS does not need to run in the same station where the other components are running, the following examples assume that it is. Thin Client LAN Thin Client station (Web Browser + ISSymbol control) that connects the Server via the LAN.

Thin Client WAN Thin Client station (Web Browser + ISSymbol control) that connects the Server via the WAN. IP SERVER LAN _ _ IP Address of the Server on the LAN. IP SERVER WAN _ _ IP Address of the Server on the WAN. IP ROUTER LAN _ _ IP Address of the Router on the LAN. IP ROUTER WAN _ _ IP Address of the Router on the WAN. ScreenName Name of the project screen, saved as HTML, that is open on the Thin Client station. Setting WTG Enabled Web Gateway Disabled Data Server IP Address IP SERVER LAN _ _ IP SERVER LAN _ _ Secondary Data Server IP Address - - Web Tunneling Gateway IP Address IP SERVER LAN _ _ - Web Tunneling Gateway Secondary IP Address - -