Troubleshooting A. When a screen is saved as HTML, IWS saves a ScreenName .tagl file in the \WEB subfolder. This file has the list of all tags configured in the screen (objects and animations). When a screen is opened in the Thin Client browser, the tags listed in the ScreenName .tagl are "enabled" for TCP/IP communication with the server station. It provides an optimized communication between the server station and the Thin Client stations. When using indirect tags in this way ( @ IndirectTag ), the tags pointed will not exchange data with the Server, unless they had been configured in the screen.
In other words, the tags that will be pointed in the screen MUST be configured in any object of the screen to enable the TCP/IP communication for these tags with the server station. Tip: Add a transparent rectangle (no fill and no line) in the screen corner. Apply the Command animation to this rectangle and configure the tags (which can be pointed by indirect tags during runtime in the Thin Client station) in the Expression fields (keep the Tag Name fields blank). These tags will be added to the ScreenName .TAGL file, and they will be available for TCP/IP communication with the Server station. Q.
Which functionalities are not supported by PocketPC platforms (for example, IPaq, Cassiopeia, Jornada)? A. Windows CE devices powered PocketPC do not support some functionality which are supported by Windows CE devices powered by the "standard" Windows CE version: Functionality not supported by PocketPC devices DCOM (Distributed Component Object Model): It means that all features based on DCOM (for example, remote OPC communication) are not supported by PocketPC devices. DialGetClientIP() function does not work for PocketPC devices Q. How do I enable the "Hibernate" options from the operating system after installing IWS on a notebook? A. Follow the procedure below: 1.
Run the Registry Editor ( \Run egedit ). 2. Select the following path from the Registry Editor : HKEY_LOCAL_MACHINE\System\CurrentControlSet \Services\ Proteq\Parameters 3. The IoPortAddress parameter from the path mentioned above is set with the hexadecimal value, 0x00000111 . Set this parameter with the hexadecimal address of the LPT1 parallel port of your notebook (for example, 0x00000378 ). 4. Close the Registry Editor and reboot the computer. Tip: The Hexadecimal address of the LPT1 parallel port of the notebook can be gotten from the Control Panel ( System\Hardware\Device Manager\Ports (COM & LPT)\Printer Port (LPT1)\Properties\Resources ). Pick the initial address of the I/O Range .
Usually it is the hexadecimal address 0x00000378 . Page 436 InduSoft Web Studio