omron — Web tab

Creating a New Project for the Thin Client station that is within any range configured in the IP Security dialog. If one is not found, the server refuses the connection request from the Thin Client station. Note: By default, IP security applies only to Thin Clients connecting to the Data Server. You can also implement IP security for database synchronization between projects running on different stations . To do this, insert the following parameter into your project file ( project_name .app ): [TCP] UseWebIPSecurity=1 Advanced Settings Advanced button: Click this button to open a dialog where you can edit the Advanced Web settings. For most cases, these settings do not need to be modified.

However, depending on the architecture used in your project, you have the flexibility to configure advanced settings. Advanced dialog • Secondary Data Server IP Address field: Type the IP address (or host name) of the secondary data server station. The data server station is the computer or device where the TCP/IP server module of IWS is running. This field must be filled when you are using redundant data servers from the Thin Clients. If the primary data server fails, the Thin Client will attempt to connect to the secondary data server automatically. • BackUp URL field: Type the URL where the Web files are stored (files from the Web sub-folder of your project folder).

This URL is used to download the files from the secondary Web server when the primary Web server is not available. • ISSymbol URL field: When the Thin Client connects to the server, it attempts to load the ISSymbol control . If ISSymbol is not registered in the local computer (Thin Client), the browser will attempt to download it from the URL specified in this field. The default URL is a web site where InduSoft keeps the most updated version of ISSymbol available for download. You may need to configure a different location, especially when the Thin Client computer is not connected to the internet.

The ISSymbolVM.cab (stored in the \BIN sub-folder of IWS) must be available in the URL configured in this field. Tip: When the Thin Client stations do not have access to the internet, it is recommended that the ISSymbolVM.cab file be made available at the Web server station, and that the URL be configured for it in this field. Note: Web browsers running under the Windows CE operating system are not able to download ISSymbol control ( ISSymbolCE.ocx ) automatically from a remote location. ISSymbolCE.ocx must be manually registered in the Windows CE device to be used as a Thin Client. • Web Tunneling Gateway checkbox: Check this option to enable the Web Tunneling Gateway.

Depending on the architecture of your project, you may need to use the Web Tunneling Gateway to route the Thin Client computers to the data server. • TCP Port : Select this option when using HTTP with the Web server of Microsoft IIS. You can specify the TCP port used by your HTTP Web server ( 80 is the default TCP port for HTTP protocol). InduSoft Web Studio Page 87