Bosch — 17.1 Overview of the basic settings

Individual safety switch-off en 16 Individual safety switch-off The safety function is activated if one cooking zone is in operation for an extended period and you do not change any settings. The cooking zone displays and switches itself off. The time from 1 to 10 hours depends on the selected power level. Press any button to switch on the cooking zone. 17 Basic settings You can configure the basic settings for your appliance to meet your needs. 17.1 Overview of the basic settings Display Setting Value ⁠ Childproof lock - Manual. 1 – Switched off. ⁠ Audible signals – Confirmation and fault signals are switched off. – Only the fault signal is switched on. Automatic.

– Only the confirmation signal is switched on. – All signal tones are switched on 1 . ⁠ Energy consumption display Shows the total energy consumption between switching the hob on and off in kWh. The accuracy of the display depends on vari- ous factors such as the voltage quality of the power supply. – Switched off. 1 – Switched on. ⁠ Automatic switch-off of the cooking zones. ⁠ – switched off. 1 ⁠ ⁠- ⁠ - minutes until the appliance switches off auto- matically. ⁠ Duration of the timer end signal tone – 10 seconds 1 – 30 seconds - 1 minute ⁠ Power limitation Enables the total power of the hob to be lim- ited, if necessary, based on the conditions of your electrical installation.

The available set- tings depend on the maximum power of the hob (see rating plate). If the function is active and the hob has reached the set power limit, – Switched off. Maximum power of the hob 1 . - 1000 W. Lowest power setting. ⁠. - 1500 W. ... - 3000 W. Recommended for 13 A ⁠. - 3500 W. Recommended for 16 A. - 4000 W. ⁠. - 4500 W. Recommended for 20 A. ... is displayed and you cannot select a higher power level. - Maximum power of the hob. ⁠ MoveMode Allows you to change the preset power levels for the three cooking areas of the flexible cooking zone. Select one of the two cooking zones, set the required power level in the settings area and touch to confirm the new power level.

- Preset power level for the front cooking zone. - Preset power level for the middle cooking zone. ⁠. - Preset power level for the rear cooking zone. ⁠ ⁠ Cookware test You can use this function to test the quality of the cookware. - Not suitable. - Not optimal. 1 Factory setting - Suitable. 15