en Cookware test Display Setting Value FlexInduction Change the switch-on mode for the Flex Zone. - As two independent cooking zones. 1 - As a connected cooking zone. Restoring factory settings - Individual settings 1 . - Factory settings. 1 Factory setting 17.2 To go to the basic settings 3. Touch to access the basic settings. a and light up as a presetting. 4. Touch repeatedly until the desired setting ap- Requirement: The hob must be switched off. 1. To switch on the hob, touch . 2. Within the next 10 seconds, press and hold for 4 pears. 5. Select the required setting in the settings area. 6. Touch and hold for 4 seconds. a The settings are saved. seconds.
Product information Display Directory for the technical after-sales service (TK) 17.3 Discarding changes to the basic settings Production number Production number 1 . Production number 2 . ▶ Touch . a All changes are discarded and not saved. a The first four displays provide the product informa- tion. To call up the individual displays, touch the control panel. 18 Cookware test The quality of the cookware has a major influence on the speed and the result of the cooking process. You can use this function to test the quality of the cook- ware. Before the test, ensure that the size of the cookware base corresponds to the size of the cooking zone be- ing used.
Access is via the basic settings. → Page 15 3. Touch the settings area. The display flashes in the cooking zones. a The test is running. a After 10 seconds, the result appears in the cooking zone displays. 18.2 Checking the result You can see what the result means for the quality and speed of the cooking process in the following table. 18.1 Carrying out Cookware test As a single cooking zone, the flexible cooking zone is set in such a way that only the individual item of cook- ware is checked. 1. At room temperature, place the cookware with ap- Result The cookware is not suitable for the cooking zone and therefore does not heat up.
The cookware is taking longer to heat up than ex- pected and cooking is not progressing as well as it ought to. The cookware is heating up correctly and cooking is progressing well. prox. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size. 2. Call up the basic settings and select . Note: If you have any unfavourable results, reposition the cookware on a smaller cooking zone, if available. To activate this function, touch the settings range. 16