int e l 3.2 DESCRIPTION OF EPROM FILE COMMANDS COMMAND: XFER(cr) ACTION TAKEN: The XFER (transfer) command transfers the current selected program in EPROM to RAM and then selects the RAM mode. If XFER is typed while MCS BASIC-52 is in the RAM mode, the program stored in RAM is transferred back into RAM and the RAM mode is selected. The net result is that nothing happens except that a few milli-seconds of CPU time is used to do a wasted move. After the XFER command is executed, the user may edit the program in the same manner any RAM program may be edited. VARIATIONS: None. - 22 -