int e l 3.3 DESCRIPTION OF EPROM FILE COMMANDS COMMAND: PROG(cr) ACTION TAKEN: The PROG COMMAND programs the resident EPROM with the current selected program. The current selected program may reside in either RAM or EPROM. This command assumes that the hardware is configured in the manner described in the EPROM PROGRAMMING section of this manual. After PROG (cr) is typed, MCS BASIC-52 displays the number in the EPROM FILE the program will occupy. EXAMPLE: >LIST 10 FOR I=1 TO 10 20 PRINT I 30 NEXT I READY >PROG 12 READY >ROM 12 READY >LIST 10 FOR I=1 TO 10 20 PRINT I 30 NEXT I READY > In this example, the program just placed in the EPROM is the 12th program stored. VARIATIONS: None. - 23 -