Delta ISPSoft — 20.3.5 Monitoring a PLC Link

Chapter 20 Network Configuration and Data Exchange  Setting area To execute setting or operating PLC Link data exchange function, the values in the related special registers in the master station and the states of the related special relays in the master station will be changed. When leaving PLC Link monitoring function, the PLC Link will remain in its last operating status, therefore, please make sure the current PLC Link status is correct before leaving the monitoring page.  When lighting is ON means the computer and PLC host remains connected.  Select the item and the setting bases on  polling number to execute. Maximum number is 65535.

 When  is selected and execution starts, the number of Execution Times is shown; the calculation is to complete one round of data read and write in slave station.  To start or stop monitoring. When disconnection occurs during monitoring process, Continue to Monitor button appears on the right upper corner of the window; when resolved, click the button to restart the connection. 20-53 Lighting Description PLC Run When lighting is ON means PLC host is RUN. PLC Link Run When lighting is ON means PLC Link enabled. Auto Mode When lighting is ON means PLC Link execution in Auto Mode. Manual mode When lighting is ON means PLC Link execution in Manual Mode.

When executing number reaches the polling number, the lighting is OFF. Synchronic R/W When lighting is ON means Synchronic R/W enabled.