Delta ISPSoft — 20.3.5 Monitoring a PLC Link

ISPSoft User Manual ● Monitoring area When the PLC Link constructed is executed, the master station exchanges data with the slave stations. The status of the data exchange between the master station and the slave stations are displayed in this area. The small pictures in the monitoring area indicate the status of the main station rather than the statuses of the slave stations. The small pictures in the monitoring area are described below.  The indicators on the small picture indicate the status of the data exchange group represented by the small picture.  The data exchange group represented by the small picture is not involved in data exchange.

 The number corresponds to a serial number in the data exchange table. It represents the serial number of the data exchange group represented by the small picture.  The number corresponds to a slave station address in the data exchange table. It represents the slave station address which belongs to the data exchange group represented by the small picture. Since PLC Link error flags for AH5x0 series and DVP series differs slightly, therefore it is displayed differently. Please refer to the following table. 20-54