Chapter 3 PLC System Configuration & Settings Device: Display the device’s name and model you are currently editing. Communication Setting: Configure the communication settings and display the PLC device’s name and model you are currently using for communication. Upload Task: for selected items; for partially selected items; for not selected items. Uploading Details: Select detail items of device settings and data exchange and relating information will be displayed in the area below. Information: Display upload progess and status. Note: - Opened via ISPSoft, the communication setting of ISPSoft would be directly applied in HWCONFIG and cannot be modified.
If you intend to change the settings, HWCONFIG must be saved and closed. Then, updates the communication settings in ISPSoft and reopen HWCONFIG. - Configure the comminication setting after opening the upload window, then select the desired items for uploading and click “Upload”. After the processing window closed, parameters can be uploaded to CPU which include modules configuration, parameters of CPU PLC and PLC parameters. - All the PLC parameters will be uploaded during upload operation. When perform download operation, the options window will be displayed first, then users can select the target parameter types without necessarily downloading all the configuration to the CPU module. 3-27