Chapter 3 PLC System Configuration & Settings 3.1.2.12 Hardware Configuration Area The Hardware Configuration Area is on the right side of the HWCONFIG by default. You can rearrange the layout; refer to section 3.1.2.4 for more details. You can see the configurations of the modules and function card here. You can also use the functional tabs including Reset Configuration to set the configurations back to default values, Show Information to see the hardware configurations and Input / Output Device Rearrange to rearrange the device ranges.
3-45 Item Description Reset Configuration Use this button to set the configurations back to default values Show Information Use this button to see the hardware configurations Input / Output Device Rearrange Use this button to rearrange the device ranges. Resize Use this button to set the display of the configuration area back to its default values (shown at 100% and in the center). + Use this button to enlarge the display of the configuration area - Use this button to shrink the display of the configuration area % Enter a precise number for the display of the configuration area Remark Use this field to enter notes