ISPSoft User Manual 3.1.2.13 Edit Area The Edit Area is on the bottom of the Hardware Configuration Area by default. You can rearrange the layout; refer to section 3.1.2.4 for more details. You can set the configurations of the PLC CPU, modules, communication port settings, Ethernet settings, function card and many more. Refer to module operation manual for more details on module configurations. When the image of PLC CPU is selected on the Hardware Configuration Area , you can set the following parameters for the PLC CPU, including system settings, communication port settings, Ethernet port settings, built-in AD/DA settings, built-in CAN communication settings on the General tab .
You can set the data exchange related settings, including communication mode and the device settings on the Data Exchange tab . 3-46