Chapter 9 Axis The bottom part of the window is a test-run window for giving a test-run command to the axis after hardware connection is made in the period of the test. After the Fetch button is clicked, the Confirm window will appear for confirmation of the control over the axis. Please note that the field configuration and personnel’s positions must be confirmed in order to make sure that no injury to personnel and no damage to devices when the motor works before the test run of the axis is started. To exit the test-run mode, click the Relinquish button to stop having the control over the axis.
Click Servo ON button to turn on or Servo OFF button to turn off the servo drive after having the control over the axis. 9-23