8.2 Drive Options and Peripheral Devices 8.2 Drive Options and Peripheral Devices The following table of peripheral devices lists the names of the various devices/options available for OYMC drives. • Peripheral Device Selection : Refer to OYMC catalog for selection and part numbers. • Peripheral Device Installation : Refer to option manual for option installation instructions.
Table 8.1 Available Peripheral Devices 150 SIEP C710606 33A OYMC AC Drive – J1000 User Manual Option Model Number Description Power Options DC Reactor — DC reactor to improve power factor AC Reactor — AC reactor to improve power factor Braking Resistor ERF-150WJ Series 3% ED, 150 W braking resistor Interface Options Remote LED Operator JVOP-182 Remote operator with LED display and copy function; Cable length max. 3 m USB/Copy Unit JVOP-181 Allows the user to copy and verify parameter settings between drives. Can also be used as adapter to connect the drive to a PC USB port Note:
SI-232/JC option is required RS-232C Serial Communication Interface SI-232/JC RS232C communications interface to connect the drive to a PC or the optional copy unit Remote Operator Interface SI-232/J RS232C communications interface for usage with the external LED operator JVOP-182 Potentiometer Option AI-V3/J Potentiometer option for setting the frequency reference directly at the drive Mechanical Options Heatsink External Mounting Attachment EZZ020568□ Installation kit for mounting the drive with the heatsink outside of the panel (side-by-side mounting possible) DIN Rail Attachment EZZ08122□ Installation kit for mounting the drive on a DIN rail NEMA Type 1 Kit EZZ020564□ Parts to make the drive conform to NEMA Type 1 enclosure Others CX-Drive — PC tool for drive setup and parameter management Communication Options RS-422/485 Serial Communications Interface SI-485/J Interface for RS-422/485 communications using the MEMOBUS/Modbus RTU protocol