Руководство по эксплуатации Kuhnke RM080 — линейный соленоид (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM080 Series Linear Solenoid Push and/or Pull Type Heavy duty linear solenoid RM 080 Weight: Complete solenoid: appr. 2900 g Armature: appr. 500 g Standard: Voltage: 24 V DC Flying leads: 20 cm Insulation class: F (max. permissible temperature = 155 ° C) Service-free DU armature bearing for maximum durability. Stroke of version with standard stroke limiter: 20 mm. 1) If solenoid is mounted directly onto a flat metal surface the duty cycle can be extended (please ask for advice) 1000 %ED Document LNSRM8/15 Revision 00 2 500 Force vs.

Stroke diagram F = f (s) 200 5 W = horizontal characteristic 100 45 25 15 F/N 50 100 Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature 20 10 stroke s = 0 corresponds to armature in fully home position 0 5 10 15 20 25 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. % 100 45 25 15 5 % Perm.

duty Cycle (ED)1) W 37 94 149 226 685 W Nominal coil power Pn ms 75 34 ms Actuation time (ED)

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM080 Series Linear Solenoid Push and/or Pull Type Ш50 M10 65 5 5 216 85 84 12 50 Dimensions given with armature in fully home position Dimensions given with armature in fully home position Direction of stroke Direction of stroke Ш9,5 Ш80 19 30 90 M10 Ш50 Document LNSRM8/25 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

without stroke limiter 45 30+1 M10 84 30+1 ~21 9,5 9,5 M10 Ø45 Ø62 Ø45 M 72 with stroke limiter 30+1 65 5 9,5 110 109 241 121 ~46 25 5 10 56 30+1 12 M10 Ø45 Ø50 Ø9,5 M5 Ø62 Ø45 19 30 90 72 Ø62 Ø45 M 30+1 25 9,5 30+1 M1 72

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM080 Series Ordering Information 2) See below 3) Opposite to electrical connection 4) Same side as electrical connection 5) Available with stroke limit only 6) For plug-in socket 6.3 DIN 46247 and plug 200 +15 Z801 and Z811 Coil terminals N F Examples of design types: Direction of stroke Document LNSRM8/35 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. RM 080 – W – O R O R – N – 24 V DC 100 % ED Ord er specifications RM Line ar solenoid series 080 Des ign type ø mm W Hor izontal frontal force vs. stroke output Des cription2) O Stroke limit without H with R Plunger right hand side3) B both sides O Flange without R right hand side3) L left hand side4) O Gaiter without R right hand side3) L left hand side4) 5) B both sides5) F Coi l terminals Flying leads (20 cm standard length) N plug-in socket connection6) 24 Op erating voltage 24 V DC 205 205 V DC (connected to 230 V AC with SI- bridge rectifier) 100 % ED Per m.

duty cycle under air cooled conditions (LK) ca.12 ca.12

Стр. 3

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM080 Series Accessories 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Flange (Mounting screws are part of the shipment) ШJ ШG ШЕ ШF ШD Order specification C B H Document LNSRM8/45 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Ø 19,0 ØI ØL K A ØI ØL K A ØL K Order Dimensio ns (mm) Dimensi ons (mm) Order number Type A B C D E F G H I J K L Type number Z 842 RM 080 90,0 12,0 17,0 45,0 38,0 45,0 80,5 1,0 9 ,5 6,4 72,0 62,0 RM 080 Z 842

Стр. 4