L-6534VW Operation Guide Various Print Settings Settings when the Eye Mark Offset exceeds 500 mm When the distance from the right edge of the eye mark to the right edge of the print data exceeds 500.0 mm as shown in the illustration below, set the distance (d) from the right edge of the eye mark at the start of the additional printing page to the right edge of the print data on the following page. However, to detect the first eye mark to print on the second base, printing is not performed for the first base.
Printing procedure 1 copy is printed when printing starts allowing you to check and fine tune the printing position as necessary so that the base layer to be printed together does not shift. 169 Item Set value Eye Mark Horizontal Offset - d