L-6534VW Operation Guide Various Print Settings Settings for Creating a Preset Set the following items and create the preset. c Important: When Additional Printing is set to Apply for the print information, the preset for reverse feeding is disabled, but the reverse feeding function is enabled. Since eye marks for additional printing are used for reverse feeding the substrate, you do not need to allocate eye marks on the print data. 168 Item Set value Additional Printing Apply Eye Mark Horizontal Offset Set the distance from the right edge of the eye mark to the right edge of the print data. See the following when setting a value of more than 500.0 mm.
U “Settings when the Eye Mark Offset exceeds 500 mm” on page 169 Eye Mark Pitch Enter the eye mark pitch for base printing Eye Mark Sensor Position Top or Bottom Preset for Reverse Feeding - (Unavailable)