L-6534VW Operation Guide Various Print Settings J Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. Print the first copy, and then pause on the unwinder side workbench. K Check the print results and measure the print shift in the color and white plates, and then enter the horizontal and vertical shift values in Adjust Print Position Horizontally and Adjust Print Position Vertically as the adjustment values. L Press Print . M On the screen displayed, enter the number of copies, and then press Print . Start white plate printing. This completes this section.
Performing Reverse Feed of the Substrate and Performing Reverse White Printing Contents Color plate printing U “Procedure for color plate printing” on page 181 Set color plate printing in Preset for Printing. In Preset for Reverse Feeding, select Use for the eye marks. Load the substrate. Print the color plate. White plate printing U “Procedure for white plate printing” on page 182 Perform settings related to additional printing for white plate in Preset for Printing. Perform reverse feed by the amount of the color plate that was printed. 179