L-6534VW Operation Guide Various Print Settings Align the leading eye mark. Perform eye mark detection and sensitivity adjustment for the eye mark sensor. Print one copy, check the print positions of the color plate and the white plate, and perform fine-tuning. Print the white plate.
Necessary settings for color plate printing Preset for Printing Preset for Reverse Feeding Necessary settings for white plate printing Preset for Printing 180 Item Set value Stop Position After Print Rewinder Side Workbench Lead In 18 m (at a print speed of 30 m/min) U “Setting value for Preset for Printing” on page 69 Lead Out 0 m Print Method For Reverse White Jobs Color Plate Printing Item Set value Reverse Feeding Apply Eye Mark for Reverse Feeding Use Distance from Top Edge of Substrate Apply to print data Distance from Right Edge of Print Job Apply to print data Reverse Feeding Position Adjustment 0 mm Item Set value Additional Printing Apply Eye Mark Horizontal Offset Set the distance from the right edge of the eye mark to the right edge of the print data.
See the following when setting a value of more than 500.0 mm. U “Settings when the Eye Mark Offset exceeds 500 mm” on page 169 Eye Mark Pitch Enter the print data width for color plate Eye Mark Sensor Position Top