L-6534VW Operation Guide Maintenance If the substrate path channel is soiled or in an abnormal condition, it could have an adverse effect on the printing results. c Important: ❏ When cleaning the surface of the roller, do not use hard materials such as tools. If the roller is damaged, the substrate may not be fed to the correct position, and color irregularities could be caused. ❏ Check that each section is not damaged or worn out. If anything is damaged or worn out, contact service support. ❏ When using substrate to which glue sticks easily, perform additional inspections and cleaning between print jobs. Unwinder side workbench A Open the top cover on the corona treater. 264 No.
(Illustrati on) Inspection Points Inspection Frequency Mode Reference 4 Unwinder side workbench Everyday Feed section U “Unwinder side workbench” on page 264 5 Web cleaner U “Web cleaner” on page 266 6 Unwinder side rollers U “Unwinder side rollers” on page 276 7 Paper width sensor U “Paper width sensor/Eye mark sensor” on page 283 8 Eye mark sensor U “Paper width sensor/Eye mark sensor” on page 283 9 Foreign substance detection roller U “Foreign substance detection roller” on page 285 10 Drum U “Drum” on page 299 11 Curing unit 3 U “Curing unit 3” on page 302 12 Rewinder side rollers U “Rewinder side rollers” on page 306 13 Ionizers Once a week U “Ionizer/Foreign Substance Detection Roller” on page 286 14 Paper edge sensor When error occurs U “Paper edge sensor/Joint sensor” on page 314 15 Joint sensor U “Paper edge sensor/Joint sensor” on page 314 16 Roll diameter sensor U “Roll diameter sensor” on page 316